Home » News » NEWS » Operation process and maintenance of automatic bag packing machine

Operation process and maintenance of automatic bag packing machine

Views:3     Author:Site Editor     Publish Time: 2021-05-31      Origin:Site

Operation process and maintenance of automatic bag packing machine

At present, industrial automation is gradually being realized. In the production process, more and more companies choose to use automatic packaging machines for product packaging, which can improve the packaging efficiency of products. However, you must understand the corresponding operating procedures during use and know how maintenance. Today, the editor will introduce in detail the operation process of the automatic packaging machine, how to maintain it?

1. What are the operating procedures of the automatic packaging machine?

1. Debug in advance. All automated machines are controlled by computers. Since manual intervention is not required, they must be debugged in advance. Different parameters are set for different working objects to ensure normal use. The setting of parameters is the prerequisite for the operation of all automated equipment. Only when the parameters are set correctly can the expected packaging effect be achieved.

2. Observe carefully. Although it is an automatic packaging machine, it can automatically perform packaging operations, but the operation of the machine is conditional, and the expected effect can be achieved with the cooperation of workers. Therefore, during the operation of the automatic packaging machine, special personnel must be assigned to supervise. Observe the operation of the machine at will, and promptly raise any errors found.

3. Regular maintenance. The automatic packaging machine needs more maintenance. Because it is controlled by a computer, it can't tolerate any mistakes. In the maintenance, you need to be more careful to ensure that every part is in the best condition. Packaging machines are essential for factories. With the acceleration of production speed, ordinary packaging machines have been unable to keep up with the pace of production.


2. How to do the maintenance of the automatic packaging machine?

1. Check the parts regularly, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and worn. If any defects are found, they should be repaired in time and should not be used reluctantly.

2. The machine should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.

3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then install it, ready for the next use.

4. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the back of the bearing frame.

The above is the detailed introduction of "Fully Automatic Automatic Packaging Machine Operation Process and Maintenance". If you have any other questions, you can consult us at any time.


Tel.: 86-757-28320088
Fax: 86-757-28303399
Mob.: 86-18988501988
Mail: wilpac@wil-pac.com
Web: www.wil-pac.com

Foshan Wilpac Packaging Machinery Co Ltd, located in Foshan. We specializes in R&D, manufacturing, marketing and offering aftersales services for high level packaging machinery. 

All products specification and outlook have been upgrade, they might be a bit different from the one showed on web.
Copyright  2020 Foshan Wilpac Packaging Machinery CO.,LTD.  | All Rights Reserved